Pepin Farm Implements
Standing the test of time since 1902
Pepin, Wisconsin
1-800-637-3746

Home Products About Us Contact Us


HD-750A with R-6 Sections & HD-1100 Auto Kit

 

Super Heavy Duty Automatic Hydraulic Harrow Drawbars

There are many models of Pepin Hydraulic Harrow Drawbars which provide a size to fit every farm operation. Let your hydraulic System do the work for you; When equipped with the HD-1100 Automatic Kit, it puts you in complete control right from your tractor seat.

Folding the unit into Field Position:
Back the unit up until the wings position themselves in line with the center boom. Lower the sections to the ground with your hydraulic system. You are now ready to harrow.

Folding into Transport Position:
Raise the sections to vertical position. Drive forward and the wings will pull into transport position and you are ready to hit the road.

Now, if you so desire, you can save around $650 by omitting the HD-1100 Automatic Pull Cable Kit. This will make the unit “Semi-Automatic”, which means when you are in transport, you will have to get off the tractor to remove the cables from the section lift arm hooks and put the pull cable eyes in the pull cable plate at the front of the harrow cart before opening the unit. When going from field position into transport position, you will again need to get off of the tractor and pull the pins back out of the pull cable plate and hang the cables on the section lift arm hooks before pulling the unit forward into transport mode. This is obviously an option, but we truly feel your needs are best served with the Automatic Kit.

SPECIFICATIONS

Model

HD-700A

HD-750A

Adjustable Width

40’0” – 43’0”

43’0” – 47’6”

Cylinder

4” x 8”
Furnished

4” x 8”
Furnished

Wing Booms
& Center Booms

4” x 4”

4” x 4”

Adjustable Cart
Wheel Spacing

72” – 88”
Center to Center of Tire

72” – 88”
Center to Center of Tire

 

Cutting Width

Drawbar
Model

Center
Harrow Section

Wing Boom Harrow
Sections EACH WING

Factory Recommended Coil Tine Harrow Section Packages

40’0”

41’0”

42’0”

43’0”

43’6”`

HD-700A

HD-700A

HD-700A

HD-700A

HD-750A

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

1- 6’0”

3- 5’6”

2- 5’6” & 1- 6’0”

1- 5’6” & 1- 6’0”

3- 6’0”

3- 6’0”

Factory Recommended Spike Tooth Harrow Section Packages

40’0”

41’0”

42’0”

43’0”

43’0”

44’0”

45’0”

46’0”

47’0”

HD-700A

HD-700A

HD-700A

HD-700A

HD-750A

HD-750A

HD-750A

HD-750A

HD-750A

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

1- 5’6”

3- 5’6”

2- 5’6” & 1- 6’0”

1- 5’6” & 1- 6’0”

3- 6’0”

3- 6’0”

1- 5’6”; 1- 7’0” & 1- 6’0”

2- 6’0” & 1- 7’0”

1- 5’6” & 2- 7’0”

1- 6’0” & 2- 7’0”

*Cutting widths may be adjusted by changing the size of the center harrow section.*

 

 


This site designed and hosted by
Plum Creek Associates